|
|
| PROBLEM:The two Phillips Screws holding the gas cap together get loose, then fall out. This generally only happens when cap is installed and you are scooting down the streeet. Needless to say this results in screws, springs, and all manner of bad stuff falling into your gas tank, not to mention a gas cap that doesn't work! |
 |
|
SOLLUTION: Remove cap and carefully remove ONE SCREW AT A TIME. |
 |
|
Apply one drop of Blue Loctite to the screw and replace and tighten in gas cap. Then do the other screw the same way. |
 |
| Double Check tightness and replace gas cap on tank. |
 |
 |
|
|
|
 |